"Street Star v2.0" Chevy 383 Stroker Crate Engine

"Street Star v2.0" Chevy 383 Stroker Crate Engine
• Complete and Dyno Tested
• 420-450 Horsepower
• 445-455 Torque
• Dart SHP Aluminum Heads
• 100% Brand New Castings
• EFI Upgrade Available
Online price:

Call to check availability
Quick Overview:
This Chevy 383 stroker crate engine is ideal for serious street performance. Our Street Star v2.0 383 Chev stroker high performance crate engines boast an honest 420+ horsepower and 445+ torque and run on premium pump gas. If you're looking to get big block power from a small block, the 383 crate engine is the high performance crate engine for you. The version 2.0 Street Star package starts with a brand new GM block, Dart SHP aluminum cylinder heads and is customizable for what you're looking for.
Order new GM crate engines today.

With over 30 years of experience in remanufacturing stock replacement, marine and high-performance engines, Tri Star Engines is your local engine remanufacturing choice. With hundreds of engines to choose from Ford crate engines to Chevy marine engines we cover all of your stock replacement engine needs. High-performance engines are a specialty of Tri Star Engines. We dyno test every high-performance crate engine we remanufacture with 100% local American made quality, ensuring our remanufactured engines for sale are the highest quality you can get!
Remember we also specialize in high performance and stock transmissions for Ford, GM, and more! Our transmissions, transfer cases, and differentials are all remanufactured with American care and quality.
Don’t forget about our long block diesel engines too.
Contact us for questions
Select Product Options
You must complete each * required step below before proceeding to checkout

Block Options

New GM block

For this 383 build we start with a brand new GM 4 bolt main block, freshly cast for your high performance engine.

You have the option of a 2 piece rear main seal block (used on production 350 engines before 1986) or a 1 piece rear main seal block (used on production 350 engines 1986 and later). Both builds feature a high quality Fel-Pro® rear main seal to virtually eliminate possible oil leaks.

Camshaft Options


Intake Manifold Options

Option 1: Edelbrock Performer RPM aluminum intake, part # 7101 [Standard option, included in price]

7101 Edelbrock Chevy

Option 2: Edelbrock Torker II aluminum intake, part # 5001 [No cost difference]

This manifold is shorter and should clear most stock Corvette hoods.

5001 Edelbrock

Option 3: Edelbrock Performer RPM aluminum intake as Endurashine finish, part # 71014 [Adds $150]

71014 Edelbrock Chevy

Distributor Options

Option 1: MSD Street Fire HEI Distributor # 8362 [Standard option, included in price]

HEI Style distributor, coil in cap, does not require serparate ignition box

Option 2: MSD Pro Billet Distributor # 85551 [Add $125]

Requires a separate ignition box and coil. Narrow cap.

Option 3: MSD Pro Billet Ready to Run Distributor # 8360 [Add $200]

This distributor does not require an ignition box (still requires a coil). Narrow cap.

Option 4: MSD Pro Billet Tach Drive Distributor # 8572 [Add $300]

For 1963-1974 Corvettes



Maximum number of characters: 20

Water Pump Options

Standard aluminum finish:

Short style aluminum pump Long style aluminum pump

Edelbrock Endurashine™ finish:

Short style aluminum pump Endurashine finish Short style aluminum pump Endurashine finish

These are display images only, actual product may vary.

Flexplate Options

For automatic transmissions only. We currently do not offer flywheels (for manual transmissions).

168 Tooth 153 Tooth

Add $65

Flexplates are shipped with the engine but are not installed.

These are display images only, actual product may vary.

Not sure what balance you need? Don't worry - We will select the correct flexplate based upon the other options you select for the build!

Starter Options

Powermaster Part #9000

Starters are shipped with the engine but are not installed.

These are display images only, actual product may vary.

* Required Fields

Online Price: $6,195.00
This engine is supplied with a NEW GM 4 bolt main block.

The Complete & Dyno'd build level comes fully dressed with timing cover, oil pan, Tri Star polished aluminum valve covers, harmonic balancer, intake, carburetor (optional EFI upgrade), distributor, spark plugs and wires. For this build level we test each engine on our own in house dynamometer; you get the dyno sheet from the actual engine sold to you.

The 383 stroker high performance crate engine is recommended for the street cruiser that spends some time at the drag strip. Get big block power from a small block engine with this 383 stroker!

Tri Star Performance lets you customize your engine build to what you really want. Start by telling us what block to use. Next, look through the variety of options offered for each high performance crate engine. Add what you want to make it your own, even add your own customized text to the valve covers!
Note: Headers are highly recommended for this application. If you are using stock exhaust manifolds please notify us with your order to ensure proper fitment.
Part Number
New GM Block.

Stress relieved 4 bolt main block is completely CNC machined in our state of the art CNC machining center. The block is fully align honed and torque plate honed, then assembled with brass frost plugs and pressure tested. These blocks are 100% brand new.
Short Block Features
• Scat cast steel crankshaft
• Scat 4340 I-beam connecting rods with ARP cap screws
• DSS Racing Forged Pistons
• Moly rings
• Clevite main and rod bearings
• True roller double roller timing set
• Melling high volume oil pump
• Howards hydraulic roller camshaft
Externally Balanced (balanced to small block 400 for 2 piece build, or 1986 and newer 350 for 1 piece build)
Camshaft Advertised Duration
Option 1: 278° Intake | 284° Exhaust
Option 2: 286° Intake | 294° Exhaust
Camshaft Duration @ .050"
Option 1: 225° Intake | 231° Exhaust
Option 2: 233° Intake | 241° Exhaust
Camshaft Lift
Option 1: .500 Intake | .510 Exhaust
Option 2: .530 Intake | .545 Exhaust
Dart™ SHP Cylinder head castings

►200cc Intake Runner
►64cc combustion chamber volume
►Straight spark plugs
►2.02 stainless intake valves
►1.60 stainless exhaust valves
►HP valve springs
►Hardened pushrods

►Scorpion full roller aluminum rocker arms
►Premium alloy:
       •A356-T6 aluminum alloy
►Hardened exhaust seats are compatible with unleaded gasoline
►Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
Cast, machined and assembled in the USA
Additional Parts Included
• Edelbrock Performer RPM intake manifold
• Quick Fuel HR ("Hot Rod") series carburetor
• MSD HEI Street Fire Distributor
• HP plug wires and wire looms
• AC spark plugs
• Tri Star polished aluminum valve covers
• Chrome timing cover
• New stamped steel oil pan w/ 1 pc. pan gasket
• HD Harmonic balancer
2 year nationwide warranty (parts only)
Click here for warranty overview
Crude oil, gasoline, diesel fuel and other petroleum products can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.p65warnings.ca.gov.